haha rubio 'that happened' at trump
Posted by renesis at 13:26 | permalink | 0 comments
lordpil's blog
wait
they make angle and channel bars out of welded plates
thats pretty hardcore
HI GUYS DO YOU NEED WORK BECAUSE I DUNNO WHAT TO DO WITH ALL MY MONEY TAKE IT ALL
heh
Posted by renesis at 12:37 | permalink | 0 comments
spool it, sell it, get promoted, boss buys you pizza, die like yay
pretty sure the only waty this works is by having balanced spools flying around at 10krpm
https://www.youtube.com/watch?v=dfSPepuHUmc
guys watch about f1 practice with me
this dork is like, medium technical
he onced ask two f1 management types if they were going to netflix and chill together
they were both old confused white guys
not sure if ted ignorant or genius, but hes british so entertaining
yeah thats what dude showed me today
THIS IS NEAT YOU CANT MAKE THAT FEATURE BUT WE CAN MAKE ONE THAT WORKS HI!
Posted by renesis at 12:32 | permalink | 0 comments
is at least two
i think 3
blackmoon: so i just maybe have chatter or heating issues going slower?
macegr: non force in #cars is tumoms
*no
no but running slower
if i keep depth and chip load the same but spin slower, whats the diff? its the same number of cuts per volume
so more vibration, more cutting force, more heat?
macegr: ha 6061 is like crumbly cheese or clay
once it turns to clay you are fucked
well, maybe not if you can keep it really hot
but that never happens
the solution it to preheat the upper shank of the endmill
so the aluminum doesnt solidify at the top of the flutes
you basically make a turbo extruder
Posted by renesis at 12:27 | permalink | 0 comments
mine has machine threaded screws, doesnt have the best motors, can 60 ipm
i want to measure the backlash on hipster cnc
Posted by renesis at 12:22 | permalink | 0 comments
yeah so aluminum is like 1000 SFM, typical tools
at 1/8" which is what this hipster CNC comes with, thats 30k rpm, which is 3x the max rpm of hipster cnc
and .0005 chipload thats 60 ipm
http://carbide3d.com/nomad/
i dont even think the shit specs a max ipm
this isnt mine, and fuck sherline
i have a taig
is like an order of magnitude less silly
Posted by renesis at 12:17 | permalink | 0 comments
macegr: woo homebrew machining
speeds and feeds say 75krpm, because 1.2 mm endmill
machine maxes out at 10krpm
Posted by renesis at 11:55 | permalink | 0 comments
meshcam posted a thing
timecop: win 10 has up key in explorer again
this is a big deal
Posted by renesis at 04:49 | permalink | 0 comments
cam software thinking hard
progress rate is 4 sec per pixel
nice
estimated cutting time, 801 minutes
Posted by renesis at 04:44 | permalink | 0 comments
2303 dongles were the only ones that always worked for me
was like, but the cheapest dongle, always works
Posted by renesis at 04:03 | permalink | 0 comments
reza_: be more general?
non biological cyborgs
gazorpazorps are drama
Posted by renesis at 03:12 | permalink | 0 comments
russians tend to be crazy realistic and rational in the face of uncontrollable power
like, things which piss me off they see as staus quo
just the way of things
and while my behavior almost begs for the attention of those looking for dissent, they tend to tread lighter in terms of communication
Posted by renesis at 03:06 | permalink | 0 comments
oh god thats been a dead issue since i was in elementary school in the 80s
also the missionaries were slave owners, and missions might as well be plantations
jezus fuck the details are almost always so much worse than the top level american imperialism stories
like, top level were pretty hypocritical
get into the details and were indisputably criminal and tyranical
that said, still better than a lot of places
yeah, thanksgiving also seen in a negative light since i was a kid
by mid 80s, most of that american exceptionalism and revisionism was dead, as far as my teachers were concerned
prob not the case in the south
Posted by renesis at 03:01 | permalink | 0 comments
i dont doubt it, and im actually a big fan of russian engineering
also my closest friends in norcal are russian and ukranian, <3
no they are pretty much brothers
they dont know but they have lived together the majority of the past 10 years i've known them
and yeah i see russians as two main groups
white russians and siberian russians
ukranians are white russians
white russians are pretty much eastern europeans
yeah i saw that they proved that genetically, pretty neat
thats been assumed since i was a kid those, the whole bearing straight land bridge thing
*though
UNITED PACIFIC RING OF FIRE, feer.
Posted by renesis at 02:56 | permalink | 0 comments
even staged thats pretty russian
maybe got some contract work driving someones little CNC
Posted by renesis at 02:42 | permalink | 0 comments
Top | Add to Technorati Favorites
© 2007 lordpil. XHTML 1.0! CSS! Site design by GNAA Blog Engine by pbx | MULTI2 | ian hanschen | lolwat